Aspects of fatigue failure mechanisms in polymer fuel cell membranes

The swelling‐driven fatigue behavior of polymer fuel cell membranes during relative humidity (RH) cycling is investigated. In particular, swelling‐induced membrane stresses are obtained from a numerical model simulating fuel cell RH cycle tests, and compared to the lifetimes obtained experimentally from tests conducted in the absence of electrochemical effects. A strong correlation between the lifetimes of the membranes in the actual tests and model results is obtained. In general, higher RH (or swelling) amplitude results in larger stress amplitudes and shorter lifetime, that is, fewer cycles to failure. Tensile stresses are needed for forming local cavities in the membrane, which may eventually lead to craze formation. Cavitation is less likely to occur in compressed membrane at high humidities. The stress–lifetime plots for polymer fuel cell membranes exhibit similar features to those observed for other polymers. The crazing criterion for polymers suggests that craze initiation during RH cycling is more likely to occur in the low compression regions, such as under the channels, which is in agreement with experimental observations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1506–1517, 2011     

Classicality for small slope overconvergent automorphic forms on some compact PEL Shimura varieties of type C

We study the rigid cohomology of the ordinary locus in some compact PEL Shimura varieties of type C with values in automorphic local systems and use it to prove a small slope criterion for classicality of overconvergent Hecke eigenforms. This generalises work of Coleman, and is a first step in an ongoing project to extend the cohomological approach to classicality to higher-dimensional Shimura varieties.     

Functions and Shapes in the Light of the International System of Units

Famously, Galilei made the ontological claim that the book of nature is written in the language of mathematics. Probably, if only implicitly, most contemporary natural scientists share his view. This paper, in contradistinction, argues that nature is only partly written in the language of mathematics; partly, it is written in the language of functions and partly in a very simple purely qualitative language, too. During the argumentation, three more specific but in themselves interesting theses are put forward: first (in Section 3), there are more shapes than real numbers; second (in Section 4), the metrological notion ‘amount of substance’ can profitably be exchanged for ‘number of entities’; third (in Section 5), prototypical concepts will always be scientifically important.     

Über singuläre Elementarflächen und das Dehnsche Lemma II

Ohne Zusammenfassung     

Dendrimers in thiol‐ene crosslinked networks and the effect of subsequent generations on thermoset properties

A series of well‐defined allyl‐ether functionalized polyester dendrimers has been synthesized via the divergent approach using traditional esterification reactions. Two commercially available trifunctional thiols, trimethylolpropane tri(3‐mercaptopropanoate) (TRIS) and ethoxylated trimethylolpropane tri(3‐mercaptopropanoate) (ETTMP), were incorporated with the dendrimers into the thiol‐ene polymer networks. The thiol‐ene reactions were conducted at room temperature and cured by UV light without the addition of photoinitiatior. Highly crosslinked films were obtained and characterized with respect to mechanical (DMA) and thermal (DSC and TGA) properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 589–601, 2009     

Synthesis and thiol–ene photopolymerization of allyl‐ether functionalized dendrimers

Well‐defined, allyl‐ether functional, first‐generation dendrimers have been synthesized. The convergent growth approach was utilized, using the anhydride of the allyl‐ether terminated building block. Three different core moieties were used: trimethylolpropane, trisphenol, and ditrimethylolpropane. The coupling reactions proceeded in good yields and all compounds were characterized by NMR, MALDI‐TOF, and SEC. The allyl‐terminated dendrimers were crosslinked by thiol–ene chemistry, using a multifunctional thiol, TriThiol, to give clear and smooth films. The photopolymerization was conducted in the presence of a photoinitiator, Irgacure 651, and no traces of either allyl‐ether groups or thiols were observed by FT‐Raman after cure. All crosslinked films were characterized with respect to mechanical (DMA) and thermal (DSC) properties. It was found that homogeneous networks were formed and that the core functionality and structure had little effect on the network properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1339–1348, 2008     

Angle-resolved photoemission study of a vacancy-induced state in substoichiometric VC

A vacancy induced state has been identified at about 1.8eV binding energy on the (100) face of VC_0.80 using angle-resolved photoelectron spectroscopy. The recorded spectra are compared with calculated spectra for VC_1.0 and the results show that the origin of the observed state cannot be accounted for by the energy band structure of VC_1.0. Photoemission spectra recorded after exposing the clean surface to O₂ and CO are also presented and used in a discussion of the sensitivity of the vacancy induced state to surface contamination.     

Three-stage auto-ignition of n-heptane and methyl-cyclohexane mixtures at lean conditions in a flat piston rapid compression machine

One approach to enhancing the thermal efficiency of combustion systems is to burn fuels at ultra-lean conditions (equivalence ratio below 0.5). It has been recently reported that the auto-ignition of some hydrocarbon fuels, under specific temperature, pressure, and mixture conditions, releases heat in three distinctive stages. The three auto-ignition stages can be divided as a first low-temperature auto-ignition stage with conventional low temperature, and a high-temperature stage separated into two sub-stages. This study presents ignition delay time measurements of n-heptane and methyl-cyclohexane (MCH) mixtures in a flat piston rapid compression machine (RCM) under ultra-lean conditions. It provides experimental evidence of three-stage auto-ignition. This phenomenon of delayed high-temperature heat release is seldom reported in the literature and this is the first time to be reported for these types of fuels. The experiments cover two binary n-heptane/MCH mixtures of 15/85 and 70/30 by volume, pressures of 11 bar and 16 bar, temperature range of 700 to 900 K, and equivalence ratio of 0.4. The RCM optical access was utilized for high-speed chemiluminescence imaging. Detailed chemical kinetic simulations in a homogenous batch reactor with variable volume were conducted to further interrogate the three-stage auto-ignition phenomenon. Chemiluminescence shows that three-stage auto-ignition occurs in the adiabatically compressed end-gas, which indicates that this phenomenon is chemically-driven and is not induced by a thermal stratification in the RCM experiments. The model predicts the features of three-stage auto-ignition, which were experimentally observed at temperatures approximately below 750 K. As expected, significant discrepancies are observed in the ignition delays of experiment and simulation in the negative temperature coefficient (NTC) region. The simulation of the n-heptane/MCH 70/30 mixture shows better agreement with experiments in the Positive Temperature Coefficient (PTC) region compared to the 15/85 mixture.